How To Install Stone-coated Metal Roof Tiles Stone – Video

Metal roofing is becoming very popular because it adds durability, beauty, and helps reduce the energy costs of your home. This type of roofing is available in a wide array of colors, textures, and styles, and can suit anyone’s aesthetic preferences. Install your own metal roofing to add efficiency and style to your home while saving money at the same time.

Tips for Installing Colorful Stone-coated Metal Roofing Tiles

Make sure the first panel is installed square – all the other panels will follow it.

On exposed fastener panels: While you don’t have to predrill holes for your screws, predrilling panels will make it easier to get the screw lines straighter. – You can predrill a stack of about 10 panels at a time. – Make sure you measure for predrilling accurately.

If you pop lines for your screws, make sure to use blue chalk, and NOT RED CHALK. Red chalk is very difficult to get off and can stay on for months, while blue chalk will usually wash off with the next rain.

If you need to cut panels lengthwise, you can score them with a box cutter several times, and then bend it back and forth until it breaks off, producing a clean edge. You can also use tin snips or the TurboShear Drill Attachment for cutting them.

Screw your fasteners in straight, and don’t overtighten them. The best way to do this is to set your drill tension, preferably testing it out on a scrap piece of metal or on an area that will be covered over by a ridge cap or other flashing.

Wear protective rubber coated gloves while working with metal roofing and flashings. This not only protects you from the sharp metal edges, it also gives you a better grip on the metal roofing.

After you finish installing the metal roofing, make sure to brush off any metal filings / shavings that are on the roof. Otherwise they will cause unsightly rust spots where they rest on the metal roofing.

Leave a Reply